Canon BU 45 Camera Control System User's Manual
RCP Connections to the Network
Duplicate Ethernet connections on the Telemetrics RCP allow redundant network
connections can be made to each camera if needed. Status of the network connection(s)
to the selected camera is included on the RCP user interface.
Details concerning the network connections, including the additional hardware devices
that are required, are provided in the Installation and Setup section of this manual.
Specifications
Specifications for the Telemetrics Canon BU 45 Camera Control System are
summarized below:
Camera Control System Specifications
Cameras
Telemetric Remote Control Panel (RCP) Specifications
Display
Joystick
Via Eden Mini ITX
Motherboard
Ethernet Ports
14
Up to 16 Canon BU 45 cameras can be controlled by the
system
10.4 inch VGA touch screen
1024 x 768 maximum resolution
Brightness: 350 cd/m2
Contrast: 250:1
Three-axis with proportional control for pan and tilt
Tactile control· Spring-loaded knob on top for zoom, which
returns to the center upon release
1 GHz CPU
512 MB RAM
4 GB CP FLASH
Dual 10/100 MBS