Assigning Cameras To The Rcp(S) - Canon BU 45 User Manual

Canon BU 45 Camera Control System User's Manual

Assigning Cameras to the RCP(s)

Up to sixteen cameras can be included in the camera control network. After the cameras
have been installed and connected to one or more RCPs (see pages 15 through 23), the
cameras must be assigned to each RCP so they can be recognized.
Before cameras can be assigned to the RCPs, setup information must be
entered for each RCP as described on page 24.
1.
Select the camera configuration
Camera Configuration screen is displayed (Figure 18).
Line 1
Figure 18 Camera Configuration Screen
28
Start at line 1 (Figure 18) when configuring the first camera.
Configure each additional camera using the next available line.
The configuration line number, camera type, and camera
description are displayed in the status bar of the RCP touch screen
whenever that camera is selected (page 10).
button on the RCP touch screen. The