Setting Guidelines; Logic For Group Alarm Wrncalh; Identification; Application - ABB 650 series Applications Manual

1MRK 511 423-UEN A
9.3.3
9.4
9.4.1
9.4.1.1
9.4.1.2
9.5
9.5.1
9.5.1.1
Bay control REC650 2.2 IEC
Application manual

Setting guidelines

Operation: On or Off

Logic for group alarm WRNCALH

Identification

Function description
Logic for group warning

Application

Group warning logic function WRNCALH is used to route warning signals to
LEDs and/or output contacts on the IED.
WRNCALH output signal WARNING and the physical outputs allows the user to
adapt the warning signal to physical tripping outputs according to the specific
application needs.

Setting guidelines

OperationOn or Off

Logic for group indication INDCALH

Identification
Function description
Logic for group indication
Application
Group indication logic function INDCALH is used to route indication signals to
different LEDs and/or output contacts on the IED.
INDCALH output signal IND and the physical outputs allows the user to adapt the
indication signal to physical outputs according to the specific application needs.
IEC 61850 IEC 60617
identification identification
WRNCALH -
IEC 61850 IEC 60617
identification identification
INDCALH -
Section 9
Logic
GUID-0BDD898A-360B-4443-A5CF-7619C80A17F4 v2
GUID-3EBD3D5B-F506-4557-88D7-DFC0BD21C690 v4
ANSI/IEEE C37.2
device number
-
GUID-FC0DBB7B-FF86-44BF-83D6-DDF120A176DE v1
GUID-B08F2636-33DA-4937-92EB-1A8AC0909AB4 v2
GUID-3B5D4371-420D-4249-B6A4-5A168920D635 v4
ANSI/IEEE C37.2
device number
-
GUID-9BAD30FB-4B75-4E14-82A8-6A59B09FA6EA v1
179