Event Function Event; Identification; Application - ABB 650 series Applications Manual

Section 10
Monitoring
10.5
10.5.1
10.5.2
210
tDGasPresAlm: Time delay for gas pressure alarm.
tDGasPresLO: Time delay for gas pressure lockout.
DirCoef: Directional coefficient for circuit breaker life calculation.
RatedOperCurr: Rated operating current of the circuit breaker.
RatedFltCurr: Rated fault current of the circuit breaker.
OperNoRated: Number of operations possible at rated current.
OperNoFault: Number of operations possible at rated fault current.
CBLifeAlmLevel: Alarm level for circuit breaker remaining life.
AccSelCal: Selection between the method of calculation of accumulated energy.
OperTimeDelay: Time delay between change of status of trip output and start of
main contact separation.

Event function EVENT

Identification

Function description
Event function

Application

When using a Substation Automation system with LON or SPA communication,
time-tagged events can be sent at change or cyclically from the IED to the station
level. These events are created from any available signal in the IED that is
connected to the Event function (EVENT). The EVENT function block is used for
LON and SPA communication.
Analog, integer and double indication values are also transferred through the
EVENT function.
IEC 61850 IEC 60617
identification identification
EVENT
S00946 V1 EN-US
1MRK 511 423-UEN A
IP14590-1 v2
SEMOD167950-2 v2
ANSI/IEEE C37.2
device number
-
M12805-6 v11
Bay control REC650 2.2 IEC
Application manual