Controller Status Screen - ABB PGC2000 Operation And Service Manual

1. On the VN Menu screen with Startup highlighted, press the F4 (Refresh VNSA Tables) soft key
and then press the Escape soft key to return to the Commands screen.
2. On the Commands screen, cursor to TESTING/SETUP and then press the F4 (Status Display)
soft key.
3. On the Controller Status screen (see Figure 2-24), note that "Blocks Acked" and "Blocks
Received" both have numbers, indicating that your command to Refresh VNSA Tables was sent
and acknowledged. You are now connected to VistaNET.
2-38
***** Controller Status
CPU: 41% Memory: 089% /
Channel:
Domain:
# Blocks Acked
# Blocks Not Acked
# Blocks Received
# Purges/Queued
# Time Outs
# Blocks Dropped
# Blocks Avail/Used
Clear
Escape Highway
Stats
F1 F2
Figure 2-24. CONTROLLER STATUS SCREEN
*****
342656 Bytes
One Two
0.1 0.2
001463 000955
000360 000167
001467 000953
000000 000000
000372 000365
000000 000000
000014 000000
F3 F4
2000-OSM, F1