Method Table #01 Screen - ABB PGC2000 Operation And Service Manual

6. Cursor to the Function field and scroll to Temp Contrl. In Figure 4-41, with Temp Contrl in the
Function field the Value column lists Two as the function to be performed from the Temperature
Control Table.
7. Move the cursor to the Value column and the Temperature Control Table appears, with the cursor
on Entry line 02 (see Figure 4-42). Note the Entry line number when you enter the table so you
can exit the table from the same line, if desired.
4-45
***** Method Table #01
Time Function
[0001] Temp. Contrl
0010 Temp. Check
0120 Noise Calc
0125 Noise Calc
0128 Auto Zero
0130 Skp, Nxt,Str=
0132 Valve On
0155 Valve Off
Insert
Exit Line
F1 F2
Figure 4-41. METHOD TABLE #01 SCREEN
***** Temperature Control
Entry Zone
01 Temp Zone1
[02] Temp Zone1
03 Temp Zone1
04 Temp Zone1
05 Temp Zone1
06 Temp Zone1
07 Temp Zone1
08 Temp Zone1
Exit
F1 F2
Figure 4-42. TEMPERATURE CONTROL SCREEN
Value
Two
One
On
Off
N/A
Nine
One
One
More Below
Delete Cal Define
Line & Cycle
Time
F3
Set Point Ramp Rate
C C/MIN
150.0 25.00
250.0 50.00
100.0 01.00
0.000 0.000
0.000 0.000
0.000 0.000
0.000 0.000
0.000 0.000
More Below
F3
*****
F4
*****
F4
2000-OSM, F1