System Variations; Specifications; Physical; Safety Area Classification - ABB PGC2000 Operation And Service Manual

SYSTEM VARIATIONS

This manual supports the PGC2000 basic analyzer. An appendix to the main manual presents
additional instructions for special applications such as PGC2002 (simulated distillation), PGC2003
(PNA), PGC2005 (temperature programmed GC), PGC2007 (fuel sulfur), PGC2008 (olefins), and
PGC2030 (Sparging Sample Conditioning System).

SPECIFICATIONS

Physical

Environmental
(Enclosure):
Ambient Temperature
Range:
Humidity:
Dimensions:
Weight:
Mounting:
Wall:
Floor:
EMI/RFI Consideration:
Electrical Entries:
Pneumatic Entries:
Sample Entries:
Gas:
Liquid:
Vents:

Safety Area Classification

NEC:
ATEX:
CSA/NRTL:
Z or Y-Purge Wait Time:
X-Purge Timeout:
2000-OSM, F1
Protected from weather: IP 52, (NEMA Type 12) Equivalent
32 to 122° F (0 to +50° C); application dependent
maximum of 95% relative humidity, non-condensing
19.5 in. W x 13.4 in. D x 46.3 in. H
(495 mm W x 340 mm D x 1176 mm H)
160 lb (73 kg) (minimum, configuration dependent)
1.3 in. (32 mm) from wall with brackets
Optional wheeled dolly
Conforms to Class A Industrial Environment
Top
Right Side
Bottom
Right Side
Bottom and/or Right Side
Class I, Div 1 Group B, C, D with type Y-Purge T4, T3 or T2
Conforms to ATEX Directive 94/9/EC and EMC Directive
89/336/EED as amended by 92/31/EEC & 93/68/EEC
Zone 1: CE 0081; II 2G, EEx pde [ib] ib [ia] IIB+H2 T4, T3 or T2
Zone 2: CE; II 3G EEx nP [ib] ib IIB+H2 T4, T3 or T2
(T-code and protection method are dependent upon application)
Class I, Div 1 Group B, C, D with type X-Purge T4, T3 or T2
Class I, Div 2 Group B, C, D with type Z-Purge T4, T3 or T2
4.5 minutes
4.6 minutes @ 60 Hz, 5.5 minutes @ 50 Hz
1-3