Setting Access Levels - ABB PGC2000 Operation And Service Manual

13. When you have completed and verified your entries, press the F2 (Exit and Update) soft key to
save your entries.
Figure 2-20. VistaNET ESSENTIAL ADDRESSES SCREEN

Setting Access Levels

Next you must enter the appropriate access level. There are three levels of remote access (i.e., via
VistaNET) granted by the analyzer:
1. Net Locked: no remote modification of the analyzer's tables is permitted. It requires a
SUPERVISOR VNSA access level to modify any of the analyzer's tables from the front panel (see
the applicable VistaNET Installation Guide for more information).
2. Restricted: remote modification of tables is limited to users that have SUPERVISOR or NORMAL
access level.
3. Unrestricted: remote modifications can be performed by any user.
You set the remote access level for an analyzer from the front panel as follows:
2-34
******* VistaNET Essential Addresses *******
Name: [GCC10
Tag: GCC10
Board Address:
Domain 1:
Domain 2:
VNSA Address:
Router Address:
Exit
Escape and
Update
F1 F2
]
0.10
0.1
0.2
0.1.0.199
0.1.0.199
F3 F4
2000-OSM, F1