Table of Contents
Advertisement
ND filter
The built-in optical ND filter (light intensity adjustment filter) can be switched.
≥ Use this when recording in sunny outdoor when the subject is too bright and the screen becomes washed out.
ND1/16
ND FILTER
1
Switch to multi manual icon [
pressing the
2
Press the SET button.
≥ The multi manual icon will change to white. (Function Execution Mode)
3
Press the
/
[ND1/64]:
[ND1/16]:
[ND1/4]:
[CLEAR]:
4
Press the SET button to complete the setup.
≥ If the selected setting [ND1/64], [ND1/16] or [ND1/4] does not match an ND filter setting recommended by this unit,
the recommended setting will be displayed on the screen, blink for approximately 5 seconds and disappear.
≥ A recommend ND filter setting may not be displayed correctly in scenes that are too dark.
≥ The brightness may change drastically when the ND filter is changed.
ND1/64
ND FILTER] (yellow display: Function Selection Mode) by
/
buttons in the recording screen.
buttons to switch the ND filter.
Reduces the amount of light to 1/64.
Reduces the amount of light to 1/16.
Reduces the amount of light to 1/4.
Does not use the ND filter.
A Recommended ND filter setting
B ND filter setting
C Multi manual icon [ND FILTER]
- 80 -
Advertisement
Table of Contents
