Table of Contents
Advertisement
∫ Color temperature setting ([COLOR TEMP])
1
Press the [EXIT] button and the [ATW] button of [WHITE BAL] simultaneously.
≥ The [A], [B], and [ATW] buttons of [WHITE BAL] light, and color temperature setting mode is enabled.
The color temperature setting value appears on the LCD screen during this time.
2
Turn the [F1] dial to change the color temperature.
≥ Press the [A], [B], and [ATW] buttons of [WHITE BAL] to return to the mode of the selected button.
The mode will switch from the color temperature mode to the original mode after a specific amount of time
passes.
To configure the color temperature setting again, press the [EXIT] button and the [ATW] button of [WHITE BAL]
simultaneously.
∫ Optical image stabilization function setting
1
Press the [MENU] button on the AW-RP120.
≥ The [MENU] button lights.
2
Press the [FUNCTION] menu [23] button.
≥ The button lights, and the [OPTION] menu appears on the LCD panel.
3
Turn the [F1] dial to select "I.S.", then press the [F1] dial.
≥ "Off" or "On" appears on the bottom right (F2 area) of the LCD panel.
4
Turn the [F2] dial to select "Off" or "On", then press the [F2] dial.
[Off]:
Image stabilization function not used.
[On]:
Image stabilization function used.
∫ Digital extender ([D.EXTENDER]) function setting
1
Press the [MENU] button on the AW-RP120.
≥ The [MENU] button lights.
2
Press the [FUNCTION] menu [23] button.
≥ The button lights, and the [OPTION] menu appears on the LCD panel.
3
Turn the [F1] dial to select "D. EXTENDER".
≥ "Off" or "On" appears on the bottom right (F2 area) of the LCD panel.
4
Turn the [F2] dial to select "Off" or "On", then press the [F2] dial.
[Off]:
D.Zoom function Off
[On]:
D.Zoom function On
∫ Assigning [COLOR TEMP] and [DIGITAL EXTENDER] to the [USER] buttons
It is possible to assign off/on for the color temperature setting ([COLOR TEMP]) or for the digital extender function
([DIGITAL EXTENDER]) to the [USER] button.
1
Press the [MENU] button on the AW-RP120.
≥ The [MENU] button lights.
2
Press the [USER] menu [35] button.
≥ The button lights, and the [USER1] menu appears on the LCD panel.
3
Turn the [F1] dial to select a button from "USER1" to "USER8".
≥ The functions that can be assigned to the [USER] button appear on the bottom right (F2 area) of the LCD panel.
4
Turn the [F2] dial to select "COLOR TEMP" or "D.EXT" then press the [F2] dial.
[COLOR TEMP]:
[D. EXT]:
Color temperature settings
D.Zoom function
- 115 -
Advertisement
Table of Contents
