Table of Contents
Advertisement
Network connection
Remote operation by a PC
It is possible to distribute the streaming image of the unit (IP image transmission) or change the setup of the unit (IP
control) with the web browser screen of a PC by connecting the unit and a PC with a wired LAN network.
Functions that can and cannot be controlled simultaneously
The number of pixels of the streaming image or the format that can be recorded in the SD card differs depending on
the [Priority Mode]
(l
144) setup.
±: Recording is possible/s: Recording or distribution is not possible
[Priority Mode] setting
REC/PB(4K)
REC/PB
IP(4K)
IP
≥ The image right before the REC check is displayed as the IP image during REC check.
≥ The time stamp of IP image in H.264 can be displayed in case of CAM Mode.
≥ The time stamp of IP image in JPEG can be displayed in case of CAM Mode when [Priority Mode] is set to [ REC/
PB ] or [ IP ].
(When [Priority Mode] is set to [IP])
≥ When the SDI input signal format is 1920k1080/23.98PsF, images in H.264/JPEG format cannot be displayed on
the Live screen of the unit.
(When [Priority Mode] is set to [ REC/PB ])
≥ When [REC FORMAT] is set to [ PH 1080/23.98p ], images in H.264 format cannot be displayed on the Live screen of
the unit.
(When [Priority Mode] is set to [IP(4K)])
≥ This unit cannot display H.264 format 4K images on the Live screen. To display 4K images, use an external device
or external software that supports 4K images.
Record to SD card
±
±
s
s
- 120 -
H.264
IP streaming
s
Distribution of 1ch is
possible
Distribution of 2ch is
possible
JPEG
Distribution of 1ch is
possible
Advertisement
Table of Contents
