Panasonic AG-UMR20P Operating Instructions Manual page 152

Memory card portable recorder
Hide thumbs Also See for AG-UMR20P:
Table of Contents

Advertisement

Unicast port (Image)
Enter the unicast port number (used when sending images from the unit).
Usable port number range: 1024 to 50000
≥ Only even numbers can be specified.
≥ The port number cannot be set to 10670.
Factory settings:
H.264(1): 32004
H.264(2): 32014
Unicast port (Audio)
Usable port number range: 1024 to 50000
≥ Only even numbers can be specified.
≥ The port number cannot be set to 10670.
Factory settings:
H.264(1): 33004
H.264(2): 33014
≥ The unicast port number must be configured when [Transmission type] is set to [Unicast port (MANUAL)].
Multicast address
Enter the multicast IP address. Images and audio will be sent to the specified IP address.
Usable values: 224.0.0.0 to 239.255.255.255
Factory settings:
H.264(1): 239.192.0.20
H.264(2): 239.192.0.21
≥ Verify usable multicast IP addresses before entering this setting.
Multicast port
Enter the multicast port number (used when sending images from the unit).
Usable port number range: 1024 to 50000
≥ Only even numbers can be specified.
≥ The port number cannot be set to 10670.
Factory settings: 37004
≥ When sending audio from the unit, a port number with "1000" added to the multicast port number will be used.
Multicast TTL/HOPLimit
Enter the TTL/HOPLimit value for multicast.
Usable values: 1 to 254
Factory settings: 16
≥ When transmitting H.264 images via the Internet, transmitted images may not appear depending on proxy server
settings, firewall settings, etc. In such cases, consult your network administrator.
≥ When displaying multicast images on a personal computer with multiple LAN cards installed, disable the LAN cards
that are not used for reception.
≥ IP control can be performed but if you do not want to perform IP image transmission, set "JPEG transmission",
"H.264 transmission" and "Audio Transmission" to "Off". In this case, IP images will also not be displayed on the
mobile terminal.
List of settings for transmission output of IP video
≥ For details, refer to " Functions that can and cannot be controlled simultaneously "
pixels/frame rate during SD card recording and IP streaming "
(l
121).
- 152 -
120) and " About number of
(l

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ag-umr20e

Table of Contents