Turning The Unit On/Off - Panasonic AG-UMR20P Operating Instructions Manual

Memory card portable recorder
Hide thumbs Also See for AG-UMR20P:
Table of Contents

Advertisement

Preparation

Turning the unit on/off

≥ The method for turning on the unit depends on the setting of [POWER UP OPTION].
Press power button B for 2 seconds or more to turn on the unit.
A The status indicator lights on.
≥ Operation Mode icon (
(CAM Mode): Displayed when the unit is turned on while connected to the Camera Head.
j
(SDI Mode): Displayed when the unit is turned on while not connected to the Camera Head. It is also
j
≥ This unit may automatically reboot when turned on in the following cases.
j When turned on for the first time after connecting this unit with the Camera Head
j When turned on after connecting this unit with another Camera Head
The setup of the [ SCENE FILE ] menu saved in the Camera Head is reflected to this unit after the reboot.
≥ When in SDI Mode, to turn on the unit again after [ECONOMY (BATT)] or [ECONOMY (AC)] have worked, press the
power button for 2 seconds or longer to turn on the unit.
≥ Connecting or removing the Camera Head with this unit turned on may cause this unit and the Camera Head to
malfunction. Be sure to turn off this unit before connecting/disconnecting the Camera Head to/from it.
≥ If the camera head is faulty, such as a fault or a cable disconnection, [System error. Please turn off.] is displayed on
the LCD monitor, recording is not possible.
≥ If you turn off the unit without pressing the power button by, for example, disconnecting the AC adaptor from the AC
outlet, the unit will not memorize the zoom and focus positions, iris and gain values, and shutter speed at that point
in time. To have the unit remember the last-used positions and values when it is turned on, follow either of the steps
below to have it memorize them.
j Turn off the unit by pressing the power button.
j Switch to Playback Mode.
/
) is displayed on the screen.
displayed if the unit is turned on while pressing and holding the USER1 button after
connecting the Camera Head.
To turn off the unit
Press the power button for 2 seconds or more.
The status indicator goes off.
(l
226)
- 31 -
(l
226)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ag-umr20e

Table of Contents