[Tc/Ub Setup] - Panasonic AG-UMR20P Operating Instructions Manual

[TC/UB SETUP]

All default settings are indicated with underlined text.
: [TC/UB SETUP] # desired setting
[DF MODE]
Selects the compensation mode for the time code.
≥ Set [SYSTEM FREQ] to [59.94Hz].
[DF]/[NDF]
[TCG]
Sets the way the time code will move.
[FREE RUN]/[REC RUN]
[SDI REGEN]
The values of the time code and the users bit to be recorded in the SDI Mode can be selected.
[ON]/[OFF]
[TC PRESET]
Initial value of the time code can be set.
[UB PRESET]
≥ Set [PRIORITY MODE] to [REC/PB] or [IP]
User Information can be set.
(l
(l 40)
(l 63)
(l 63)
(l 32)
(l 64)
63)
- 215 -
(l 65)