Table of Contents
Advertisement
Basic screen [Basic]
∫ Priority mode tab [Priority Mode]
Set the priority output of video.
Priority Mode
Configure the setting for the priority output of video.
≥ This item's setting is reflected when the [Set] button is
pressed.
Setting value:
*
IP, REC/PB, IP(4K)
, REC/PB(4K)
Factory settings: REC/PB
≥ For explanation of each setup value, refer to page 32.
* Not displayed during SDI Mode.
≥ When the priority mode is changed, the operation of the mode before the change is forcefully stopped.
≥ The "IP", "REC/PB", "IP(4K)" and "REC/PB(4K)" mode require various settings to be configured from a personal
computer connected via the network.
≥ This unit cannot display H.264 format 4K images on the Live screen. To display 4K images, use an external device
or external software that supports 4K images.
∫ Clock settings tab [Date&Time]
Configure the settings for the clock. Set the clock using any of the three methods: [PC synchronization], [NTP], and
[Manual].
≥ This item's setting is reflected when the [Set] button is pressed.
¥ setup
Display
Set the display of the date and time on the Live screen.
Factory settings: Off
PC synchronization
If you click the [Execute] button, the settings are
configured by synchronizing the unit to the date and time of
the connected personal computer.
≥ The time zone of the personal computer is not reflected
on the unit.
Set the time zone on the unit.
NTP
If you click [NTP>>], the settings screen for the NTP server appears.
Manual - Date/time
Configure the settings for the month, day, and year and for the hour, minute, and second.
≥ The data display format is MMM/DD/YYYY.
≥ The time is in the 24-hour format.
Manual - Time zone
Select the time zone of your region.
≥ For details, refer to [ Time zone table ] on page 37.
*
- 144 -
(l
170)
Advertisement
Table of Contents
