Table of Contents
Advertisement
Remote Operation Panel [AK-HRP200]
≥ With the AK-HRP200, it is necessary to set [CAMERA TYPE] in [IP Mode] to [Remote IP]. For details, refer to the
Operating Instructions for the AK-HRP200.
The following operations can be performed from the AK-HRP200 Remote Operation Panel.
For details on operations, refer to the AK-HRP200 Operating Instructions.
Control/display component
1
Camera power switch
2
Viewfinder power switch
3
Color bar signal output switch
4
Auto white balance switch
5
Auto black balance switch
A For operating the Camera Text Menus.
When the [CHARA/MENU] button is pressed for
about 2 seconds, the selected camera menu is
displayed, overlapping the camera output image.
When it is pressed for about 2 seconds while a
menu is displayed, the menu is exited.
[SELECT]:
Turn [SELECT] to move the cursor up and down in
the Camera Text Menu or to change setting values.
Press [SELECT] to move to the next level of a menu
item or to change a setting value at the lowest level.
B For selecting the cameras to be operated.
1
Press and hold the [SELECT] button for
about 2 seconds.
≥ The camera number in the camera number
2
Press the lit [UP]/[DOWN] button.
≥ Press the lit [UP]/[DOWN] button to select the
3
Press the [SELECT] button.
≥ Control of the selected camera is enabled.
Label
[HEAD POWER]
[VF POWER]
[BARS/TEST]
[AUTO WHITE]
[AUTO BLACK]
- 116 -
display area blinks.
camera number.
AG-UMR20
± : Supported
#: Supported with
some
restrictions
s : Not supported
≥ Use this to switch
±
≥ Use this to switch
s
Does not transition to
#
TEST_ON.
±
±
Remarks
between Recording
Mode and Playback
Mode when
[PRIORITY MODE] is
set to [REC/PB] or
[REC/PB(4K)].
between Recording
Mode and standby
mode when
[PRIORITY MODE] is
set to [IP] or [IP(4K)].
Advertisement
Table of Contents
