Table of Contents
Advertisement
6
Stream buttons [Stream]
When [H.264] is selected
These buttons appear only when H.264 images are displayed.
When selected, the text on the button turns green, and the images in the main area appear
according to the settings configured for [H.264(1)].
When selected, the text on the button turns green, and the images in the main area appear
according to the settings configured for [H.264(2)].
≥ In the following cases, the selection status of the [Stream] buttons will return to the setting configured in the
[Video over IP] tab - [Initial display settings for "Live" page] - [Stream].
j When returning from another screen
j When the screen is updated
≥ The selected H.264 image may be reduced to a size smaller than actual size depending on the size of the Web
browser window
When [JPEG] is selected
When selected, the text on the button turns green, and the images in the main area appear
according to the settings configured for [JPEG(1)].
7
SD Card Operation buttons [SD Card Operation]
Perform the operations for recording the video and audio captured with the unit to an SD card.
Starts recording to an SD card.
The SD access lamp on the top right of the screen is displayed in red during recording.
Stops recording to an SD card.
Displays a list of the recorded content.
8
Camera Text Menu Operation [OSD Menu Operation]
≥ The Camera Text Menu is not displayed on the IP image if [DISPLAY MENU] is set to [TOUCH] on the unit.
≥ The Camera Text Menu is displayed on the IP image as superimposed text by setting [DISPLAY MENU] to [TEXT]
on the unit and then setting the Camera Text Menu display to [On] on the web screen.
The Camera Text Menu is not displayed on the LCD monitor of the unit or the output destination of the HDMI OUT/
SDI OUT terminal.
≥ For Camera Text Menu, refer to page 140.
Switches the display/hide of the Camera Text Menu.
It cancels the selection of the setting which is being changed. It restores the pre-change
setting.
Use these to perform the menu operations.
The items are selected using the [
If a selected item has a sub menu, this sub menu is displayed by pressing the [OK]
button.
When the cursor is moved to any item on the bottom-level setting screen and the [OK]
button is pressed, the setting of the selected item starts flashing.
While the setting of the selected item is flashing, if another item is selected, the setting
of the newly-selected item will be reflected immediately. Press the [OK] button to stop
the flashing and enter the new setting.
(l
149)
(l
149)
(l
148)
/
/
/
] buttons.
- 136 -
(l
227)
Advertisement
Table of Contents
