Table of Contents
Advertisement
Record to SD card
MP4 or AVCHD clip can be saved to SD card by remotely controlling this unit.
≥ For compatible SD card, refer to page 27.
≥ Set the priority mode to "REC/PB" or "REC/PB(4K)" before use. For details, refer to "Priority mode tab
[Priority Mode]"
(l
144)
≥ IP control and IP video transmission can be used at the same time as these functions if you use a LAN cable.
However, some limitations will occur to IP video transmission compared with when the priority mode is set to "IP".
For details, refer to "Switching the priority mode"/"Priority mode tab [Priority Mode]"
≥ When the priority mode is "REC/PB(4K)", the IP transmission of H.264 images is not possible.
Recording
When an SD card that has been used with another device is to be used with the unit for the first time, format (initialize)
the SD card before use. Furthermore, when a commercially available SD card is to be used for the first time, be sure to
format (initialize) it with the unit.
For details, refer to "Format"
1
Select the media to record.
≥ For details, refer to [Media Select]
2
Set the priority mode to "REC/PB" or "REC/PB(4K)".
≥ "Priority mode tab [Priority Mode]"
3
Set the format for the video to be recorded.
≥ "SD card tab [SD memory card]"
4
Click [Live] on the Web screen and then
click [Other Menu >>].
5
Start and stop recording by clicking the
[Rec] button and [Stop] button of the [SD
Card Operation] item.
≥ When recording starts, the SD access lamp on the
top right of the screen is displayed in red.
(l
147).
(l
146).
(l
144)
(l
146)
- 187 -
(l
32, 144).
Advertisement
Table of Contents
