GE 239 Instruction Manual page 114

CHAPTER 6: User Interface
Clicking the arrow at the end of the box displays a numerical keypad
interface that allows the user to enter a value within the setpoint
range displayed near the top of the keypad:
Click Accept to exit from the keypad and keep the new value.
Click on Cancel to exit from the keypad and retain the old value.
For setpoints requiring non-numerical pre-set values (e.g.
GROUND
above), clicking anywhere within the setpoint value box
CT TYPE
displays a drop-down selection menu arrow. Select the desired value
from this list.
For setpoints requiring an alphanumeric text string (e.g. message
scratchpad messages), the value may be entered directly within the
setpoint value box.
Click on Save to save the values into the 239.
Click OK to accept any changes and exit the window.
Otherwise, click Restore to retain previous values and exit.
6–78 239 MOTOR PROTECTION RELAY – INSTRUCTION MANUAL
Courtesy of NationalSwitchgear.com