Working With Setpoints And Setpoint Files; Engaging A Device; Entering Setpoints - GE 239 Instruction Manual

CHAPTER 6: User Interface
6.3

Working with Setpoints and Setpoint Files

6.3.1

Engaging a Device

6.3.2

Entering Setpoints

239 MOTOR PROTECTION RELAY – INSTRUCTION MANUAL
Courtesy of NationalSwitchgear.com
The EnerVista 239 Setup software may be used in on-line mode (relay connected) to
directly communicate with a 239 relay. Communicating relays are organized and grouped
by communication interfaces and into sites. Sites may contain any number of relays
selected from the SR or UR product series.
The System Setup page will be used as an example to illustrate the entering of setpoints. In
this example, we will be changing the current sensing setpoints.
Establish communications with the relay.
Select the Setpoint > S2 System Setup > CT/VT Setup menu item.
This can be selected from the device setpoint tree or the main
window menu bar.
Select the
parameter box.
This will display three arrows: two to increment/decrement the value
and another to launch the numerical calculator.
setpoint by clicking anywhere in the
PHASE CT PRIMARY
6–77