Digital Input Configuration - ABB SM500F User Manual

SM500F
Field mountable paperless recorder

7.8.3 Digital Input Configuration

Note. The 'Digital I/P' tab is displayed only if 'Source ID' for the Recording Channel is set to a digital
signal source – see Section 7.8.1, page 93.
•1 If this parameter is changed, internally recorded data files are recreated and unarchived data is lost.
IM/SM500F Rev. Z
•1
Note. This parameter is displayed only if 'Input type' on the 'Analog I/P'
tab (see page 96) is set to 'Volt free digital input'*. If this parameter is
changed to anything other than 'Volt free digital input', the input channel
reverts to an analog input channel – see page 96.
* 24V Digital i/P
Enter the tag to be displayed on channel indicators when the digital signal
is active (6 characters max.).
Note. Tags with a high percentage of capital letters and wide characters
such as 'W' or 'M' may appear truncated in some Operator views. In such
cases, use lower case letters or fewer characters.
Enter the tag to be displayed on channel indicators when the digital signal
is inactive (6 characters max.).
Note. Tags with a high percentage of capital letters and wide characters
such as 'W' or 'M' may appear truncated in some Operator views. In such
cases, use lower case letters or fewer characters.
Enter the tag name to be displayed in the Chart and Indicator views and
used to identify the channel in archive files (16 characters max.).
Note. Tags with a high percentage of capital letters and wide characters
such as 'W' or 'M' may appear truncated in some Operator views. In such
cases, use lower case letters or fewer characters.
7 Configuration
99