Configuring Batch Access Privileges - ABB SM500F User Manual

SM500F
Field mountable paperless recorder
F.4.2 Configuring Batch Access Privileges
To enable operators to manually control batches, access Common Configuration (see Section 7.6.5,
page 80) and select the 'User ' tab.
178
Select 'User 1 Access'.
Ensure the 'Batch' field is ticked to allow User 1 to start and stop batches
– see Section F.3, page 174.
Repeat as required for other Users.
Refer to page 179 to set the required type of batch recording security.
Appendix F – Batch Recording
IM/SM500F Rev. Z