Configuring The Indicator View - ABB SM500F User Manual

SM500F
Field mountable paperless recorder

7.7.3 Configuring the Indicator View

IM/SM500F Rev. Z
Select 'On' to enable the operator to display the Indicator view.
Note. Available only if the totalizer option is enabled in the software and a
totalizer for that channel is enabled.
Set to 'On' to add the channel totalizer value and units to the Indicator
view.
Set to 'On' to add the Bargraph display to the Indicator view.
Set to 'On' to add the alarm trip point indicators to the Indicator view.
Select the menu items to be accessible from the Indicator view.
Operator Message
Enables the Operator to activate one of 24 pre-configured messages or a
user-defined message.
Totalizer Stop / Go
Enables the Operator to start and stop the totalizers.
Totalizer Reset
Enables the Operator to reset the totalizer value to the preset totalizer
value on any or all channels.
Show Totalizers / Statistics
Enables the Operator to change the display to show either the totalizer
values or the totalizer maximum, minimum and average values.
Alarm Acknowledge
Enables the Operator to acknowledge any alarms associated with the
current group.
Note. Menu items that are not enabled are greyed-out (color recorders)
or blanked out when selected (monochrome recorders) in the Indicator
view menu.
7 Configuration
89