Hitachi IJ UX Instruction Manual page 59

3.3.6-2 New HMI
(1) Overview
●There are 2 types of settings.
No. Classification
1 Setting of value
2 Setting of selection
(2) Operation ("Adjust print parameters screen (New HMI)" is used as an
example.)
●There are 2 types of settings.
Configurable icon
"Character Height" setting (Value input)
1
Display the numerical window by pressing the numerical value and input the value.
The background
color is changed by
pressing the value.
Set value confirmation
method
The numerical value is
displayed on the screen.
The set value selection is
displayed on the screen.
Adjust print parameters
Character Height Print Start Delay
85
− ＋ −
Pulse Rate Div. Factor
Character Width
2
− ＋ −
Adjust print parameters
Range ：0-99
Character Height Print Start Delay
7 8
85
− ＋ −
4 5
Pulse Rate Div. Factor
Character Width
1 2
2
− ＋ −
0 -1 +1
The numerical window is closed and
the input value is reflected on the screen.
Set value change method
When "The set possible icon" is
displayed, display the numerical
window by pressing the numerical
value and input the value.
When "Slectable icon" is displayed,
display the selection menu window by
pressing the set value and select the set
value from the items.
OFFLINE
× STOP
Scanning Unit
Reciprocative Print Start Delay
０
＋
SC
Forward
Direction
1/ 1
＋
Reverse
Direction
STOP OFFLINE
×
×
Scanning Unit
Reciprocative Print Start Delay
9 AC Scanning Unit
０
＋
SC
6
×
Forward
Direction
3
1/ 1
＋
Reverse
ENT
Direction
2015.07.07 12:45
ID:User2
Selectable icon
− 100% ＋
Scanning Unit
０
SC
０
SC
2015.07.07 12:45
Displays the
ID:User2
configurable range.
The numerical window
is closed and the value
stays as same before.
− 100% ＋
Minimum value is input.
Back space.
０
SC
０
SC
●Basic operation 3-32