Hitachi IJ UX Instruction Manual page 147

●When the conditions in the following table are met during mixed single/interlaced control, printing that
mixes single scan and interlaced is possible.
Conditions for interlaced printing at Mixed single scan and interlaced
No.
1 Barcodes are not set.
When number of line is two or more, all fonts of
2
items in each column are the same.
Ink drop use is from 1/1 to 1/4.
3
(The high speed print is not applicable.)
●When the conditions in the following table are met during dot mixed interlaced, interlaced printing with
mixed dots is possible.
No.
1 All fonts of items in each column are the same.
2 Barcodes are not set.
Following (1) or (2) is satisfied in all columns.
(Interlaced printing is also possible when all
columns are configured only with the condition
(2).)
3 (1) When number of line is two or more
All fonts of items in each column are the
same.
(2) When number of line is one
The font of items is 12
Ink drop use is from 1/1 to 1/4.
4
(The High-speed print mode is not applicable.)
●1-line columns with 12
×
the IJP and printed. As a result of a sprit 1-line of 12
being pushed down, and set the Line spacing only for the case.
But, uneven printing happens when product speed matching is used at low speed .
●The number of print formats that can be set with dot mixture is up to eight at all ink drop charge rules.
And the ink drop use can not be mixed.
●Ink Drop Charge Rule Precautions
No.
The higher the speed the bigger misalignment of lines at high speed without
1
product speed matching.
Uneven printing happens at divided positions when product speed matching
2
is used for 1-line printing at low speed.
Conditions
Conditions for interlaced printing at Dot mixed interlaced
Conditions
16 or 18
× ×
16 or 18 24 font at Dot mixed interlaced will be split into 2-line (or 3-line) in
×
Precautions
Precautions
Example of print data
(Column 1) (Column 2) (Column 3)
18 24
×
Single scan
Print example
(Column 1) (Column 2) (Column 3)
18 24
×
24.
16 or 18 24, borders of characters might look
× ×
5 8
×
7 10 5 8
× ×
7 10 5 8
× ×
Interlaced
5 8
×
7 10 5 8
× ×
7 10 5 8
× ×
Interlaced
Conditions
Dot mixed
interlaced only
Dot mixed
interlaced only
●Set the print specifications 4-84