Print Without Any Sensor Signal (Test Print, Start Printing) - Hitachi IJ UX Instruction Manual

5.3 Print without any sensor signal (Test print, Start printing)

(1) Functions
●This function prints by button operation without a print start signal being input.
●In Previous HMI screens, print can also be performed by pressing Start printing from the manual control
menu when in print ready status.
●In New HMI screens, print can also be performed by pressing START PRINTING in print description
screen (New HMI) when in print ready status.
(2) Operation
Verify that the printer is in "Standby" state.
1 1
Press Test print in the Maintenance menu.
Test print
Printing starts at the press of [Start printing].
2 2
Press Start printing .
Printing starts.
(Note) Prints repeatedly when the Repeat sensor mode of the User environment setup screen is
"OFF-ON transition" and repeat print is set.
To stop during repeat printing, press the Stop .
5-5 ●Print without any sensor signal. (Test print, Start printing)
[Ready ]
Com=0
2015.07.07 12:45
Start printing
Start printing
Back