Hitachi IJ UX Instruction Manual page 29

Press the On switch. (Press for about 2 seconds.)
3
(Depending on the model, there may not be a Start switch. When the main power switch of
pressed, the following "Print description" screen appears.)
In the case of turning on the power again, ensure that status indicator lamp is off when On switch is
pressed.
The "Print description" screen shown below appears.
If the "Select login user" screen opened, see "3.1.4 Specifying the login user".
Print description
Ｓ ＡＭＰ Ｌ Ｅ １
Operating Time Ink Presure
（Standard Value ：
100 ０． ０ ０ ０
h
Print Count
1.000
HOME OPEN
●Confirm the print description, count value, and calendar character contents.
STOP
×
Makeup Ink
0.255
）
ＭＰ ａ
SAVE ADJUST EDIT
OFFLINE 2015.07.07 12:45
ID:User2
− 100% ＋
TEST
START PRINTING STARTUP
SETTINGS LOGIN
2 is
●Start operation 3-2