System Data Control; Pc Programming - Panasonic KX-TDA100 Features Manual
Hybrid ip pbx
Hide thumbs
Also See for KX-TDA100:
- Programming manual (912 pages) ,
- Pc programming manual (854 pages) ,
- Features manual (776 pages)
Table of Contents
Advertisement
2.3 System Data Control
2.3
System Data Control
2.3.1 PC Programming
Description
This PBX can be programmed and administered using a personal computer (PC). There are
two programming methods:
1)
2)
1.
On-site Programming:
Using the Serial
Interface (RS-232C)
port
Using the USB port
Using the LAN
interface
Using a modem
through an SLT port
Using an ISDN TA
interface (64 kbps)
through an ISDN
Extension Line
256
Feature Guide
On-site Programming: System programming/diagnosis can be performed locally by
connecting a PC to the PBX directly.
Remote Programming: System programming/diagnosis and data upload can be
performed from a remote location.
Method
The PBX has a Serial Interface (RS-232C) port which can be
used for either system administration or SMDR.
The PC is connected to the PBX or a DPT using a USB port.
A CTI-LINK Card must be installed.
Any trunk card and a RMT Card must be installed. Assign the
floating extension number of the analogue remote
maintenance (
dial this number from the PC to connect to the PBX.
A BRI or PRI Card must be installed. Assign the floating
extension number of the ISDN remote maintenance (
Remote Floating Extension Number), and dial this number
from the PC to connect to the PBX. The RMT Card is not
required for this method.
Description
Modem Floating Extension Number), and
ISDN
Advertisement
Table of Contents
