Panasonic KX-TDA100 Features Manual page 357

Parameter
Voice Mail (VM) DTMF Command
Recording Message
Listening Message
AA Service
VM Service
Duration Time
DTMF Duration for VM Selects the duration of the DTMF signals
DTMF Inter-digit Pause
Time
Pause Time Follow on
ID
Pause Time VM
(DTMF) Status
Others
VM (DTMF) Queuing
Mode
Call Forwarding (FWD)
to VM (DTMF)
Sequence
Intercept to VM
(DTMF) Sequence
Mailbox Number for
Extension
Message Waiting
Lamp Control
Description
Specifies the Recording Message
command. This command is transmitted to
a VM port when a call is forwarded,
intercepted or rerouted to the VM port.
Specifies the Listening Message
command. This command is transmitted to
a VM port when the message receiver
presses the Message button to listen to the
voice message.
Specifies the AA (Automated Attendant)
Service command. This command is sent to
a VM port when an incoming trunk call is
answered by the VM port.
Specifies the VM Service command.
sent to the VM.
Selects the DTMF Inter-digit Pause Time.
Selects the length of waiting time after VM
port answers a call before sending DTMF
signals (such as Follow-on ID) to VM port.
Selects the length of waiting time before
sending DTMF integration signals
(Extension/System status).
Assigns the queuing mode when VPS ports
are busy.
Selects call handling when calls are
forwarded to VPS.
Selects how calls are handled when
intercepted to VPS.
Specifies whether an extension's mailbox
number is substituted by the extension
number or Mailbox Access ID.
Selects whether the system or the VM port
turns off the Message Waiting lamp after
the extension user retrieved a message
recorded in his mailbox.
3.2 PC Programming
Value Range
Max. 16 digits including
0–9, and #
80/160 ms
80/160 ms
0.5/1.0/1.5/2.0 s
0.5/1.0/1.5/2.0 s
Enable/Disable
None/
Answer by Mailbox/
AA
None/
Answer by Mailbox/
AA
Extension Number/
Mailbox Access ID
By PBX/By VM
Feature Guide 357