Panasonic KX-TDA100 Features Manual page 306

3.2 PC Programming
Parameter
Pulse Dialling
Pulse % Break
Pulse Type
Pulse Inter-digit Pause Selects the Pulse Inter-digit Pause Time.
Tone Feed Back
Maximum Break Width Specifies the minimum Break Width.
Maximum Make Width Specifies the minimum Make Width.
Flash
Flash Signal Detection
(OPX)
Minimum Break Width
(OPX)
Flash Width (OPX)
Flash Signal Detection
(TIE)
Minimum Break Width
(TIE)
Flash Width (TIE)
Caller ID
Caller ID Start Code
Caller ID Information
End Code
Caller ID End Code
306 Feature Guide
Description
Selects the % break for pulse digits.
Selects the pulse dialling digit pattern.
Selects whether to turn on or off tone
feedback.
Assigns the detection of a flash signal
(OPX).
Specifies the minimum Break Width (OPX). 24 + 8 × n (n=0–60) ms
Specifies the duration time that the system
will recognise as switchhook flash after the
minimum BREAK width (OPX).
Assigns the detection of a flash signal
(TIE).
Specifies the minimum Break Width (TIE)
Specifies the duration time that the system
will recognise as switchhook flash after the
minimum BREAK width. (TIE)
Selects the start code of Caller ID.
Selects the Caller ID information code.
Selects the end code of Caller ID.
Value Range
60/67 %
Normal/Sweden/
New Zealand
630/830/1020 ms
Yes/No
72 + 8 × n (n=0–11) ms
8 × n (n=1–5) ms
Enable/Disable
24 + 8 × n (n=0–188)
ms
Enable/Disable
24 + 8 × n (n=0–60) ms
24 + 8 × n (n=0–188)
ms
None/ /#/A/B/C/D
None/ /#/A/B/C/D
None/ /#/A/B/C/D