Panasonic KX-TDA100 Features Manual page 300

3.2 PC Programming
Parameter
ISDN
Extension
* 0 s setting means that the system timer suspended.
Port
Parameter
Slot
Port
Port Type
Connection
Command
300 Feature Guide
T310 Specifies the maximum waiting time after
receiving the Incoming Call Proceeding
message, before expecting the
continuance message.
T312 Specifies the maximum waiting time after
sending the SETUP message to the ISDN,
before expecting the reply to it.
T316 Specifies the maximum waiting time after
sending the Restart message, before
expecting the reply to it.
T320 Specifies the time for packet protocol.
T322 Specifies the maximum waiting time after
sending the Status enquiry message,
before expecting the reply to it.
T3D3 Specifies the time that the system tries to
establish L2 in "Permanent" mode.
T3D9 Specifies the time that the system tries to
disconnect L2 in "Call by Call" mode.
Refers to the slot no. (Display only)
Refers to the port no. (Display only)
Selects the port type.
Refers to the status of the port connection.
(Display only)
Specifies the operating card command.
Description
Description
Value Range
*0–3000 s
*0–600 s
*0–3000 s
*0–3000 s
*0–600 s
*0–3000 s
*0–3000 s
Value Range
PBX No.–Slot No.
(BRI designates the
number.)
1
Trunk line/Extn./
QSIG-Master/
QSIG-Slave
INS/OUS
INS/OUS