Panasonic KX-TDA100 Features Manual page 305

Configuration–Slot–T1
Common
Parameter
Slot
Line Coding
Frame Sequence
ESF Frame Option
Sending LIU Option
Receiving LIU Option
First Dial Time (Trunk) Specifies the Pause Time between seizing
First Dial Time (DID/
TIE)
Answer Detection Time Specifies the duration time that the system
Wink Signal Width
DTMF Tone
DTMF Inter-digit Pause Specifies the DTMF Inter-digit Pause Time. 64 + 16 × n (n=0–15)
DTMF Transmitting
DTMF Receiving
Description
Specifies the slot no.
Specifies the T1 PCM line cording.
Specifies the T1 frame type.
Specifies the values of C-bit and D-bit.
Specifies the shape of the transmitted
pulse.
Specifies the level of equalisation of the
incoming line data.
the trunk and sending dialled digits.
Specifies the Pause Time between seizing
the DID/TIE channel and sending dialled
digits.
requires to recognise the answer signal.
Specifies the duration time of the Wink
signal.
Specifies the output power of the MFC-R2
signals.
Specifies the threshold of DTMF detection. -42–0, -41–0, -40–0,
3.2 PC Programming
Value Range
PBX No.–Slot No.
(Card type is only T1.)
B8ZS/AMI
D4/ESF
C=A, D=B/C=0, D=0/
C=0, D=1/C=1, D=0/
C=1, D=1
Mode 1–8
Automatic/6/12/18/24
dB
0.5 × n (n=1–16) s
32 × n (n=1–255) ms
32 × n (n=1–255) ms
128/160/192/224/256/
288 ms
ms
3, 2, 1, 0, -1– -12 dB
(3-N dB, N=0 –15)
— -11 –0 dB
(N-42 –0dB, N=0–31)
Feature Guide 305