Automatic Route Selection (Ars) - Panasonic KX-TDA100 Features Manual

3.2 PC Programming

3.2.7 Automatic Route Selection (ARS)

ARS–System
Parameter
ARS Mode
No Carrier Access
code Operation
ARS–Leading Digit
Parameter
ARS Leading Digits (1–1000)
Leading Digits
Additional Dial Digits
Routing Plan
ARS–Routing Plan Time Table
Parameter
Routing Plan Time Table (1–16)
Time Table (Sun–Sat)
Time-A Setting
Time-A
Time-B Setting
Time-B
Time-C Setting
Time-C
Time-D Setting
Time-D
378 Feature Guide
Description
Selects whether to use ARS (Automatic
Route Selection) or not.
Selects what happens when the system
does not find the carrier code.
Description
Specifies the leading digits of the telephone
number which will be routed by the ARS
procedure.
Specifies any additional digits.
Specifies the Routing Plan which is used for
routing the telephone number registered in
leading digit.
Description
Assigns whether the plan is used a first time
each day.
Specifies Time-A.
Assigns whether the plan is used a second
time each day.
Specifies Time-B.
Assigns whether the plan is used a third
time each day.
Specifies Time-C.
Assigns whether the plan is used a fourth
time each day.
Specifies Time-D.
Value Range
Off/Local Access/
All Access
Local Access/
Disconnect
Value Range
Max. 16 digits
(Wild card is not
available.)
0–5 digits
1–16
Value Range
Enable/Disable
00:00–23:59
Enable/Disable
00:00–23:59
Enable/Disable
00:00–23:59
Enable/Disable
00:00–23:59