GE MDS SD Series Technical Manual page 92

•
Host IP Address
ration file resides or where you want to send it).
• — Enter the exact name of the configuration text file that will be used by the ra-
Filename
dio to import or export configuration data.
• — Determines the amount of time in seconds that the radio should wait for a
Timeout (sec)
TFTP server to respond. The default setting is
change in most cases.
•
Export/Import Config Files
host.
Save/Restore Configuration
This screen allows saving or restoring a configuration file for the transceiver. Saving a configu-
ration file can be helpful in future troubleshooting tasks, as it allows reverting to a "known good"
configuration of the radio.
•
Restore to Factory Defaults
to the factory defaults.
•
Save Current Config
memory.
•
Restore Saved Config
saved version.
82
— Enter a valid IP address here for the host computer (where the configu-
— Choose to export/import a configuration file to/from a local
— Click this button to restore the radio's configuration settings
— Click this button to save the radio's current configuration to flash
— Click this button to restore the radio's configuration from the last
SD Series Technical Manual
seconds, and will not require any
10
MDS 05-4846A01, Rev. I