GE MDS SD Series Technical Manual page 73

• — The mode setting for the
Current Mode
or ) using this selection.
Data
•
Data Baud Rate
the following speeds: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200.
• — The default data format for the transceiver is 8 character bits, no parity,
Data Format
and 1 stop bit (8N1). A number of settings are possible as listed below:
8 character bits, no parity, 1 stop bit (Default)
8 character bits, no parity, 2 stop bits
8 character bits, odd parity, 1 stop bit
8 character bits, odd parity, 2 stop bits
8 character bits, even parity, 1 stop bit
8 character bits, even parity, 2 stop bits
7 character bits, no parity, 1 stop bit
7 character bits, no parity, 2 stop bits
7 character bits, odd parity, 1 stop bit
7 character bits, odd parity, 2 stop bits
7 character bits, even parity, 1 stop bit
7 character bits, even parity, 2 stop bits
•
Talk on/Listen to
in these fields. Refer to the SD Serial/Telnet Management Supplement, Part No. 05-
6193A01 for more information.
•
Term Srvr Status
COM2 Port Settings
is the standard port used for connection of serial payload data. The
COM2
screen contains a number of settings that may be configured to suit the needs of your system.
• — The
Mode COM2
• — The default data rate for
Baud Rate
lowing speeds: 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200.
• — The default data format for the transceiver is 8 character bits, no parity,
Data Format
and 1 stop bit (
8 character bits, no parity, 1 stop bit (Default)
8 character bits, no parity, 2 stop bits
8 character bits, odd parity, 1 stop bit
8 character bits, odd parity, 2 stop bits
8 character bits, even parity, 1 stop bit
MDS 05-4864A01, Rev. I
— The default data rate for
— Any combination of the three Virtual Radio Channels may be entered
— Indicates whether the radio's Terminal Server is enabled or disabled.
port can operate in either
). A number of settings are possible as listed below:
8N1
SD Series Technical Manual
port may be changed on demand (
COM1
is
COM1 115200 bps
or
RS-232 RS-485
is , but it may be set to any of the fol-
COM2 9600 bps
Console
, but it may be set to any of
COM2 Port Settings
mode. The default is .
RS-232
63