Blomberg SSM4450 User Manual page 8

bared cord could cause
a shock hazard if inserted
into a socket elsewhere in
the house.
The moulded plug on this
appliance
a 13 A fuse. Should the
fuse need to be replaced
an ASTABEAB approved
BS 1362 fuse of the same
rating must be used. Do
not forget to refit the fuse
cover. In the event of losing
the fuse cover the plug
must not be used until a
replacement fuse cover
has been fitted. Colour
of the replacement fuse
cover must be the same
colour as that visible on
the pin face of the plug.
Fuse covers are available
from any good electrical
store.
Important! Fitting A
Different Plug
As the colours of the
wires in the mains lead
of this appliance may
not correspond
the coloured
identifying the terminals
in your plug proceed as
follows: (See diagram).
incorporates
with
markings
10
GREEN &
6mm.
YELLOW
OR
L
GREEN
BROWN
OR
N
RED
22mm.
BLUE
OR
BLACK
CORD GRIP
Connect the green-
1.
yellow or green (Earth)
wire to the terminal in the
plug marked 'E' or with
the symbol
green and yellow or
green.
Connect the blue
2.
(Neutral) wire to the
terminal in the plug
marked 'N' or coloured
black.
Connect the brown (Live)
3.
wire to the terminal in
the plug marked 'L' or
coloured red.
With alternative plugs
4.
a 13 A fuse must be
fitted either in the plug or
adaptor or in the main
fuse box. If in doubt
contact a qualified
electrician.
EN
or coloured