ABB ACS150 User Manual page 78

78
Index Name/Selection
2 = DI2
3 = DI3
4 = DI4
5 = DI5
-1 = DI1(INV)
-2 = DI2(INV)
-3 = DI3(INV)
-4 = DI4(INV)
-5 = DI5(INV)
1602 PARAMETER LOCK
0 = LOCKED
1 = OPEN
2 = NOT SAVED
1603 PASS CODE
0...65535
1604 FAULT RESET SEL
0 = KEYPAD
1 = DI1
2 = DI2
3 = DI3
4 = DI4
5 = DI5
7 = START/STOP
-1 = DI1(INV)
-2 = DI2(INV)
-3 = DI3(INV)
-4 = DI4(INV)
-5 = DI5(INV)
Actual signals and parameters
Description
See selection DI1.
See selection DI1.
See selection DI1.
See selection DI1.
External signal required through inverted digital input DI1. 0 = Run Enable.
If Run Enable signal is switched on, the drive will not start or coasts to stop if
it is running.
See selection DI1(INV)
See selection DI1(INV)
See selection DI1(INV)
See selection DI1(INV)
Selects the state of the parameter lock. The lock prevents parameter
changing from control panel.
Parameter values cannot be changed from the control panel. The lock can be
opened by entering the valid code to parameter
The lock does not prevent parameter changes made by macros.
The lock is open. Parameter values can be changed.
Parameter changes made by control panel are not stored into the permanent
memory. To store changed parameter values, set parameter
SAVE value to SAVE.
Selects the pass code for the parameter lock (see parameter
PARAMETER LOCK).
Pass code. Setting 358 opens the lock. The value reverts back to 0
automatically.
Selects the source for the fault reset signal. The signal resets the drive after
a fault trip if the cause of the fault no longer exists.
Fault reset only from the control panel
Reset through digital input DI1 (reset by a rising edge of DI1) or by control
panel
See selection DI1.
See selection DI1.
See selection DI1.
See selection DI1.
Reset along with the stop signal received through a digital input, or by control
panel.
Reset through inverted digital input DI1 (reset by a falling edge of DI1) or by
control panel
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
1603 PASS CODE.
1607 PARAM
1602
1 = OPEN
0
0 = KEYPAD