Character Strings; Character String Constant ("Abc"); Character String Data - Mitsubishi Electric FX3G SERIES Programming Manual

FX /FX /FX Series Programmable Controllers
3G 3U 3UC
Programming Manual - Basic & Applied Instruction Edition
5.3

Character Strings

Character strings are classified into character string constants which directly specify character strings in operands in
applied instructions and character string data.
5.3.1

Character string constant ("ABC")

A device "character string" directly specifies a character string in a sequence program.
Put half-width characters inside quotation marks (example: "ABCD1234") in specification.
JIS8 code is available.
Up to 32 characters can be specified as a character string.
5.3.2

Character string data

With regard to character string data, a specified device to the NULL code (00H) is handled as one character string in
1-byte units.
When expressing (recognizing) character string data by bit devices with digit specification, however, 16 bits are
required for data including the NULL code (00H) specifying the end of the character string data because the instruction
length is 16 bits. (Refer to Example 2 in the step 2 below.)
In the following cases, an operation error occurs in the applied instruction (error code: K6706):
• When "00H" is not specified in the corresponding device range after the source device number specified in an
applied instruction
• When there are insufficient devices for storing character string data (including "00H" or "0000H" indicating the end
of the character string data) in the destination devices specified in an applied instruction
1) Character string data stored in word devices
• Example of data which can be
recognized as character string data
D100
D101
D102
D110
2) Character string data stored in bit devices with digit specification
• Example of data which can be
recognized as character string data
M115 to M100
M131 to M116
M147 to M132
M211 to M196
156
b15 b8 b7
2nd character 1st character
4th character 3rd character
6th character 5th character
00H 21st character
"00H" indicating the end of
the character string can be
detected.
16 bits
2nd character 1st character
4th character 3rd character
6th character 5th character
00H 13th character
"00H" indicating the
end of the character
string can be
detected.
5 How to Specify Devices and Constants to Instructions
• Example of data which cannot be
recognized as character string data
b0 b15
D100 2nd character
D101
4th character
D102
6th character
D7999
"n"th character
"00H" indicating the end of character string
cannot be detected from the specified
device to the end device number.
• Examples of data which cannot be
recognized as character string data
<Example 1>
M115 to M100
2nd character
M131 to M116
4th character
M147 to M132
6th character
M7679 to
"n"th character
M7664
"00H" indicating the end of character string
cannot be detected from the specified
device to the end device number.
<Example 2>
M7623 to M7608 2nd character
M7639 to M7624 4th character
M7655 to M7640 6th character
M7671 to M7656 8th character
M7679 to M7672
Because the data "00H" indicating the end
of the character string does not reach 16
bits, the end of the character string cannot
be recognized.
5.3 Character Strings
b8 b7 b0
1st character
3rd character
5th character
"(n-1)"th character
16 bits
1st character
3rd character
5th character
"(n-1)"th character
16 bits
1st character
3rd character
5th character
7th character
00H