Pri Networking Channel Limitation - NEC univerge SV9100 Programming Manual

Program 10 : System Configuration Setup
Level:
IN
Description
Use Program 10-32 : PRI Networking Channel Limitation to assign the number of B-channels to be
used for each ISDN blade. This allows for fractional PRIs when used with multiple site networking. If this
program is limited to less than "23" on one side of the network, then it also limits both inbound and
outbound network calls. For example, when you select 10 channels then only channels 1 to 10 will be
available. If a call is attempted on channels 11 to 30 the caller will receive busy tone. This also applies on
the other side of the network as well.
The setting is for each slot within the SV9100. Ensure that you select the correct slot before making any
changes.
This program will not affect a PRI card set as Trunk or Station mode.
Input Data
Slot Number
Item
No.
01 Maximum Channels
Set the maximum number of
channels that can be used with PRI
NetLink.
Conditions
None
Feature Cross Reference
None
2-56

10-32 : PRI Networking Channel Limitation

Item
1~23
1~24
Input Data
Program 10 : System Configuration Setup
Issue 4.0
Default
23