Voice Mail Delay Announcement - NEC univerge SV9100 Programming Manual

Issue 1.0
Level:
SA
Description
Use Program 41-19 : Voice Mail Delay Announcement to assign VM8000 InMail Master Mailboxes
(PRG 47-03) as Delay Announcement Mailboxes.
Input Data
Group Number
Item
No.
01 Delay Message Start Timer
Determine the time the system waits before playing the
Delay Message.
02 Mailbox Number for 1st Announcement Message
Assign the Voice Mail Announcement Mailbox as the
message source for the 1st Announcement Message.
03 1st Delay Message Sending Count
Determine the 1st Delay Message Sending Count. This
entry must be set to 1 or higher for the message to play.
04 Mailbox Number for 2nd Announcement Message
Assign the Voice Mail Announcement Mailboxes as the
message source for the 2nd Announcement Message.
05
2nd Delay Message Sending Count
Determine the 2nd Delay Message Sending Count. This
entry must be set to 1 or higher for the message to play.
06
Wait Tone Type at Message Interval
Determine what the caller hears between the messages.
07
Forced Disconnect Time after 2nd Announcement
Assign the time the system should wait after the end of
the Delay Message before disconnecting.
SV9100 Programming Manual

41-19 : Voice Mail Delay Announcement

Item
Program 41 : ACD Setup
1 ~ 64
Input Data
0 ~ 64800 (sec)
Dial
(up to eight digits)
0 = No message is
played.
1 ~ 255
Dial
(up to eight digits)
0 = No message is
played.
1 ~ 255
0 = Ring Back
Tone
1 = Music On Hold
Tone
2 = Background
Music Source
0 ~ 64800 (sec)
Default
0
No Setting
0
No Setting
0
0
0
2-527