NEC univerge SV9100 Programming Manual page 377

Issue 4.0
Item
Item
No.
07 Permit Code Table
08
Restriction Table
09
Restriction for
Common Speed Dials
10
Restriction for Group
Speed Dials
11 Intercom Call
Restriction
12 PBX Call Restriction
13 Restriction of Tie
Line Calls
SV9100 Programming Manual
Input Data Default
1~4 = Table 1, 2, 6~15 = 0
3 = 1
0 = Disable
4 = 2
(None)
5 = 3
1~4 = Table 1, 2, 6~15 = 0
0 = Disable
3 = 1
(None)
4 = 2
5 = 3
0 = Does Not
Restrict
1 = Following
Restriction
Check
0 = Does Not
Restrict
1 = Following
Restriction
Check
0 = Disable (No)
1 = Enable (Yes)
0 = Disable (No) 1~6, 8~15 = 0
1 = Enable (Yes)
7 = 1
0 = Disable (No)
1 = Enable (Yes)
Description
Set the tables 1~4 when
referring to the table set up by
21-06-06.
Set the tables 1~4 when
referring to the table set up by
21-06-07.
0
Enable/Disable Toll Restriction
for Common Speed Dialing
numbers. If enabled, System
Speed Dialing numbers have the
same restrictions as manually
dialed numbers.
0
Enable/Disable Toll Restriction
for Group Speed Dialing
numbers. If enabled, Group
Speed Dialing numbers have the
same restrictions as manually
dialed numbers.
0 Determine if incoming intercom
calls are restricted.
Set how the system Toll
Restricts calls over PBX trunks.
If you enable PBX Toll
Restriction, the system begins
Toll Restriction after the PBX
access code. The user cannot
dial a PBX extension. If you
disable PBX Toll Restriction, the
system only restricts calls that
contain the PBX access code.
The system does not restrict
calls to PBX extensions. Refer to
the PBX compatibility feature.
Make sure Program 21-05-04
(Maximum Number of Digits
Table Assignment) allows for
PBX Toll Call Dialing (normally
12 digits).
0 Enable/Disable the toll restriction
of the dial set up by 34-08.
Related
Program
21-06-06
21-06-07
34-08
2-337