System Options For Caller Id - NEC univerge SV9100 Programming Manual

Level:
IN
Description
Use Program 20-19 : System Options for Caller ID to define the system options for the Caller ID
feature.
Input Data
Item
No.
01 Caller ID Displaying Format
(if displaying digits are more than 12 digits)
02 Caller ID Information Waiting Time
03 Caller ID Edit Mode
04
Wait Facility IE Timer
This timer is used with ISDN trunks to determine the time
the system waits for the Caller ID name from the Telco.
05 Caller ID Sender Queing Time (Sender Wait)
07 Long Distance Code
08 Area Code
09
Calling Party Name for ISDN Trunk
When set, sends the Calling Party Name to the network.
10 Message Type Treated as CID for Analog Trunk
Specify message type number which treats as Caller ID
from analog trunk.
2-286
Program 20 : System Option Setup

20-19 : System Options for Caller ID

Item Input Data Default
0 = First 10 digits
(Upper)
1 = Last 10 digits
(Lower)
0 ~ 30
0 = Off
1 = On
0~64800 seconds 10
0~64800 seconds
Up to two digits
Up to six digits No
setting
Up to 12 No
setting
characters
0 = '2' only
1 = '2' and '3'
Program 20 : System Option Setup
Issue 4.0
0
5
0
0
1
1