Incoming Virtual Extension Ring Tone Order Setup - NEC univerge SV9100 Programming Manual

Issue 4.0

15-10 : Incoming Virtual Extension Ring Tone Order Setup

Level:
SA
Description
Use Program 15-10 : Incoming Virtual Extension Ring Tone Order Setup to set the priority (1~4) for
the Virtual Extension Ring Tones set in Program 15-08. When Virtual Extension calls ring an extension
simultaneously, the tone with the highest order number (e.g., 1) rings. The other keys only flash. There
are 512 Virtual Extension ports.
Input Data
Extension Number
Item Priority
No. Order
01 1~4 0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming Extension
5 = Tone Pattern 5
6 = Tone Pattern 6
7 = Tone Pattern 7
8 = Tone Pattern 8
Default
By default, Virtual Extension ring tones have the following order:

Priority
Order (Set in Program 15-08)
1 0 (Tone Pattern 1)
2 1 (Tone Pattern 2)
3 2 (Tone Pattern 3)
4 3 (Tone Pattern 4)
SV9100 Programming Manual
Program 15 : Extension, Basic Setup
Data
Ring Tone
Ring Tone
1 ~ 960
Description
When two or more virtual
extensions are set on a
function key on the telephone,
and the tone pattern by which
the sound of each extension
differs, the priority of ring
sound is set up.
Related
Program
15-08
2-219