ABB i-bus
KNX
Commissioning
3.1.1.1
Procedure
Insert the required device into the project.
Import the current application program into the ETS.
Perform parameterization and program the device.
After you have parameterized a device, you can transfer the settings to a second device.
Right click on the product and select Plug-in > Convert in the context menu for this purpose.
Thereafter undertake the required settings in the Convert dialog.
Finally, exchange the physical address and delete the old device.
Should you wish to only copy individual channels within a device, use the function
page 21.
Copy and
exchange,
VAA/S x.230.2.1 | 2CDC 508 101 D0201 19