Conversion - ABB i-bus KNX Product Manual


ABB i-bus KNX
Commissioning
3.1.1

Conversion

For ABB i-bus
group addresses from earlier application program versions.
Furthermore, conversion can be applied to transfer the existing parameterization of a device to another
device.
Note
When the term "channels" is used in the ETS, inputs and/or outputs are meant. In order to ensure that
the ETS language generally applies for as many ABB i-bus
used here.
18 2CDC 508 101 D0201 | VAA/S x.230.2.1
®
KNX devices from ETS3 or higher, it is possible to assume the parameter settings and
®
devices as possible, the word channels is