Setting The Blue Switch On The Platen - Canon imagePROGRAF iPF6400SE User Manual

Setting the Blue Switch on the Platen

Cause
The type of paper specified in the
printer driver does not match the type
loaded in the printer.
Setting the Blue Switch on the Platen
Setting the Blue Switch on the Platen
If printed documents exhibit the following symptoms, adjust the setting of the blue Switch on the Platen.
Image edges are blurred
•
Image edges are affected by white banding
•
• Always set all of the blue Switches on the Platen to the ● side for borderless printing. If the Switch are not set
correctly, the print quality may deteriorate.
Important
1
Remove any loaded paper that will not be used.
Rolls (See "Removing the Roll from the Printer.")
•
Sheet (See "Removing Sheets.")
•
2
Open the Top Cover.
3
Remove the Cleaning Brush (a).
586
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Feed Slot.")
Make sure the same type of paper is specified in the printer driver as you have loaded in
the printer.
1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and try printing again.
➔
P.363
➔
Corrective Action
P.340
➔
P.361
➔
P.345
iPF6400SE
User's Guide