Paprwidth Mismatch; Paper Size Not Detected; Insufficient Paper For Job - Canon imagePROGRAF iPF6400SE User Manual

PaprWidth Mismatch

PaprWidth Mismatch

PaprWidth Mismatch
When Detect Mismatch in the Control Panel menu is
set to Pause or Hold Job, the width of the loaded roll
does not match the width specified in Fit Roll Paper
Width in the printer driver.

Paper size not detected.

Paper size not detected.

Paper has been loaded askew, or warped paper has been loaded.

Insufficient paper for job

Insufficient paper for job

The printer has received a print job longer than the amount of roll paper left
when ManageRemainRoll in the Control Panel menu is On.
604
Cause
Cause
Cause
Corrective Action
Press ▲ or ▼ to select Print, and then press the OK button to resume
printing.
However, note that this error may cause paper jams and affect the print-
ing quality.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Follow these steps to replace the roll to match the width specified in the
printer driver.
1. Press ▲ or ▼ to select Change Paper, and then press the OK but-
ton.
(See "Removing the Roll from the Printer.")
(See "Removing Rolls From the Roll Holder.")
2.
Replace with paper of the width configured in the printer driver.
(See "Loading Rolls on the Roll Holder.")
(See "Loading Rolls in the Printer.")
The printer now starts printing the print job.
Make sure the roll width selected in the dialog box displayed when you
select Fit Roll Paper Width in the printer driver matches the width of the
roll loaded in the printer, and then try printing again.
Press the OK button and reload the paper.
(See "Loading Rolls in the Print-
er.")
(See "Loading Sheets in the Feed
Slot.")
If this error recurs after you reload the roll,
remove the Roll Holder from the printer,
push the roll firmly in until it touches the
Roll Holder flange, and reload the Roll
Holder in the printer.
(See "Loading Rolls on the Roll Hold-
er.")
Press ▲ or ▼ to select Print, and then press the
OK button to resume printing.
However, the roll paper may run out during the
print job and you may not be able to print all of the
document.
Press ▲ or ▼ to select Change Paper, and then
press the OK button.
Change the Paper Source of the printer driver, or
replace the roll with a roll that has enough paper
for the print job, and then print.
(See "Removing the Roll from the Print-
er.")
➔
(See "Loading Rolls in the Printer.")
Press ▲ or ▼ and select Stop Printing or press
the Stop button to stop printing.
P.345
➔
P.347
➔
P.338
➔
P.340
➔
Corrective Action
P.340
➔
P.361
➔
P.338
➔
Corrective Action
P.345
➔
iPF6400SE
P.340
User's Guide