Canon imagePROGRAF iPF6400SE User Manual page 353

iPF6400SE
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to
select the Paper tab (
• If the Tab Selection screen is not displayed, press the Menu button.
Note
2
Press the OK button. The Paper Menu is displayed.
3
Press ▲ or ▼ to select Paper Details, and then press the OK button.
4
Press ▲ or ▼ to select the type of paper, and then press the OK button.
5
Press ▲ or ▼ to select Cutting Mode, and then press the OK button.
6
Press ▲ or ▼ to select Manual, and then press the OK button.
7
When "Perform the detection of paper leading edge?" is displayed, select Perform(recommend).
8
Print the job.
The printer stops advancing the paper after printing.
9
Press the Feed button.
Roll paper is fed to the specified cut position and then automati-
cally stopped.
10
Cut the roll paper manually with scissors or the like.
User's Guide
).
Specifying the Cutting Method for Rolls
353