Parts Replacement Time Has Passed; Unknown File; Multi-Sensor Error - Canon imagePROGRAF iPF6400SE User Manual

Parts replacement time has passed.

Parts replacement time has passed.
Parts replacement time has passed.
It is past the recommended time to replace consumables for which service is required.

Unknown file.

Unknown file.
Data sent to keep the printer up to date (such as pa-
per information) is in the wrong format.
You have uploaded firmware for a different model.

Multi-sensor error

Multi-sensor error
Direct sunlight or strong lighting may be shin-
ing on the printer and causing the sensor to
malfunction.
The performance of a sensor inside the print-
er may be impaired.
618
Cause
Cause
Cause
Take steps to ensure the printer is not used when exposed to direct sunlight or
strong lighting.
Turn off the printer and wait at least three seconds before restoring the power.
Turn off the printer and wait at least three seconds before restoring the power.
If the message is displayed again, contact your Canon dealer for assistance.
Corrective Action
Check the data. Turn off the printer and wait a while before restoring power,
and then resend the data.
Check the firmware version. Turn off the printer and wait a while before re-
storing power, and then resend the firmware.
If the message is displayed again, contact your Canon dealer for assistance.
Corrective Action
Corrective Action
Contact your Canon dealer for assistance.
iPF6400SE
User's Guide