Paper Not Aligned With Right Guide; Cannot Detect Papr; Cannot Feed Paper; Cannot Cut Paper - Canon imagePROGRAF iPF6400SE User Manual

iPF6400SE
Paper loaded crooked was detected when the paper was advanced.
• To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or Loose
in the Skew Check Lv. setting of the printer menu. However, this may cause jams and printing problems be-
Important
cause paper may be askew when printed. Also, the Platen may become soiled, which may soil the back of the
next document when it is printed.

Paper not aligned with right guide.

Paper not aligned with right guide.

Skew Check Lv. on the Control Panel menu is set to something other than
Off and the paper is not aligned with the guide on the right during loading.

Cannot detect papr

Cannot detect papr

Cause
The printer could not detect the paper.

Cannot feed paper.

Cannot feed paper.

Cause
Paper could not be advanced correctly during feeding.
Paper could not be advanced correctly during ejection.

Cannot cut paper.

Cannot cut paper.

Cause
There are sheets left on the Ejec-
tion Guide.
User's Guide
Cause
Cause
Corrective Action
Reload the paper as follows.
1.
Remove the paper and press the OK button.
2.
Reload the paper.
(See "Loading Sheets in the Feed Slot.")
(See "Loading Rolls in the Printer.")
1.
Press the OK button.
2. Remove the paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet, Fed Manually.")
3.
Load the paper.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Feed Slot.")
1.
Press the OK button.
2.
Remove the paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet, Fed Manually.")
1.
Press the OK button and remove the paper.
2. Load paper.
Paper not aligned with right guide.
Corrective Action
If this error recurs after you reload the roll,
remove the Roll Holder from the printer,
push the roll firmly in until it touches the
Roll Holder flange, and reload the Roll
Holder in the printer.
(See "Loading Rolls on the Roll Hold-
er.")
P.338
➔
Corrective Action
Reload the paper as follows.
1. Press the OK button to clear the error.
2.
Reload the paper.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Feed Slot.")
P.361
➔
P.340
➔
Corrective Action
P.571
➔
P.340
➔
P.361
➔
P.571
➔
Corrective Action
P.340
➔
P.361
➔
P.574
➔
607
P.574
➔